V4 Alpine Lock AL102 Jetsum Oak is one of the six-floor finishes of the Alpine Lock Range by V4 Wood Flooring. This V4 Alpine Lock AL102 Jetsum Oak Brushed Natural Stained & Matt Lacquered is beautifully finished.
V4 Lock AL102 is a 15mm thick engineered wood floor which features a 4mm top wear layer of European Oak. V4 Alpine Lock Wide Engineered Boards are 190mm wide and 1.9m long. The V4 Alpine Lock range comes in pack sizes is of 2.77m2 and includes seven planks.
Please use the floor calculator to help calculate the number of packs required for your project. It is recommended to allow up to 10% wastage allowance. This is to allow for cutting around the perimeter of the room and doorways etc. Plus also if you want a specific look and wish to discard certain boards for aesthetic reasons.
The V4 Alpine Lock Engineered Oak floors are made with a multi-ply construction and a 5Gc Click Fit lock to all four sides of the board for a fast and efficient installation. Jetsum Oak is a single plank oak engineered wood floor. The top wear layer is moulded with a micro bevel to all four sides of the board which helps to distinguish it from adjacent boards and to emphasise the real oak plank look to the floor.
This oak wood flooring is milled from European Oak selected to offer a characteristic rustic appearance grade. This includes more variation in grain patterns, natural colour variation, mineral streaks and a distribution of closed and open filled knots and small natural filled cracks.
For added peace of mind V4 Alpine Lock AL102, Jetsum Oak comes with the V4 Wood Flooring guarantee. This covers the floor for a period of thirty five years on a residential installation and three years in commercial premises.
Bevel 4 Sides
Wide (150 – 190mm)
180 x 14/2.5 x 2200 mm
3 ply Engineered hardwood board with 5Gc Locking profile
1 Strip Micro Bevelled Plank
Pack Contents 7 boards which may contain 1 split length.
|Top Wear Layer|
CD Rustic Grade
Up to 5 coats of water based UV cured lacquer
35 Year Domestic Guarantee
3 Year Commercial Guarantee
|Full Stick Down|
|Floated Wood Floor Method|
Fully bonded recommended. Temperature of top surface should not exceed 27°C. See fitting guide.
|Country Of Manufacture|
Full documented evidence of legality of timber
FSC® 100% Certification Available for Project Enquires
Not available with this product
Oak 1360 lbf (6000N)
EN 13501-1 (test result: Dn – S1)
EN 12524 (Test result: 0.16W/mK)
|Release Of Formaldehyde|
EN 717-1 (Test result < 0.012mg/m3)
Good resistance in conjunction proper maintenance
Contact V4 Woodflooring Technical Department